MUbase

Solutions for your tasks

HR | base9 min readUpdated:

HR key figures for SMEs: turnover, absences, overtime

HR key figures for Swiss SMEs: headcount, full-time equivalents, turnover, absence rate, overtime and time-to-hire calculated correctly, with an example.

KMU | base editorial team

By emailLinkedIn
Dart in the centre of a target

How many people work for us, how many have left, how often is someone off sick, and where is overtime building up? Every management team asks these questions, at the latest when the budget is due or someone resigns. HR key figures answer them in numbers, provided you always calculate them the same way and compare them over time. This guide presents six key figures that are enough for an SME, how to calculate them, what the law says about overtime and health data, and how an office with 28 employees works with them.

Why a few key figures are enough

An SME does not need a dashboard with forty values. It needs a few figures that are always calculated the same way, for the same period and at the same reference date. Only then can you see whether something is changing: turnover rising, overtime growing in one department, sickness absences increasing. So decide in writing, before the first report, how you count. The six key figures in this guide cover headcount, movements, health, working time, recruiting and costs.

Headcount and full-time equivalents

Headcount counts the people employed on the reference date: joined on or before that date, and either not left or leaving on or after it. The last working day still counts. List apprentices, hourly temporary staff and people on unpaid leave separately so that year-on-year comparisons stay accurate.

Because part-time work is common in SMEs, the number of heads says little about capacity. Full-time equivalents are calculated by adding up everyone’s employment percentage and dividing by 100. Two people at 50 percent each make one full-time equivalent.

Staff turnover

The turnover rate shows what share of the workforce left the company during a period. The usual formula is:

Turnover rate = leavers in the period ÷ average headcount × 100

Calculate the average headcount from the opening headcount and the headcount at the end of each month. To compare with previous years, scale a shorter period up to a year. The figure becomes more meaningful if you split leavers by reason: resignation by the employee, dismissal by the employer, mutual agreement and retirement. A high rate due to retirements can be planned; a high rate due to resignations is a warning sign.

Absence rate

The absence rate relates days of absence to planned working days:

Absence rate = days of absence ÷ planned working days × 100

Count in working days; half days count as 0.5. Planned working days follow from the working-time model and the public holidays at the place of work. Keep the types apart: holidays do not belong in a sickness rate, nor do military service, maternity or training. For management purposes, the rate for sickness and accident matters most. A second useful figure is sickness and accident days per person, that is these days divided by the average headcount.

Extra hours and overtime under the Employment Act

Two concepts, two laws. Extra hours exceed the working time agreed in the contract (Art. 321c para. 1 CO). Overtime under the Employment Act exceeds the statutory maximum weekly working time: 45 hours for office staff, technical and other employees and workers in industrial companies, 50 hours for everyone else (Art. 9 para. 1 ArG).

Overtime is capped: no more than two hours a day and, per calendar year, no more than 170 hours with a 45-hour maximum or 140 hours with a 50-hour maximum (Art. 12 para. 2 ArG). It carries a wage supplement of at least 25 percent; for office staff and technical and other employees only for overtime above 60 hours per calendar year (Art. 13 para. 1 ArG). The basis for this key figure is the records of working and rest time that the employer must keep (Art. 73 ArGV 1).

Two key figures are enough: the sum of positive time balances at the reference date and overtime under the Employment Act in the current calendar year, each with the number of people affected. Anyone approaching the annual cap needs relief in good time.

Time-to-hire and personnel costs

Time-to-hire measures the days from receiving an application to hiring. Use the median rather than the average, so that a single long search does not distort the picture. It is also worth looking at the sources of applications that actually lead to a hire.

Monthly personnel costs consist of gross salaries and employer contributions; show expenses separately. Only calculate with closed payroll runs, not projections, so that the figures match accounting.

Data protection and key figures

The employer may only process data about employees insofar as it concerns their suitability for the employment relationship or is necessary to perform the employment contract (Art. 328b CO). Health data is sensitive personal data (Art. 5 let. c DSG); this covers sickness and accident absences. Processing must be proportionate and limited to a purpose (Art. 6 DSG), and the data must be adequately secured (Art. 8 DSG).

For key figures this means: report totals and rates, not names or diagnoses. Decide who may see the key figures. And watch out for small groups: an absence rate for a department of three people allows conclusions about individuals. Combine small units.

Practical example: Treuhand Aebi & Partner AG

Treuhand Aebi & Partner AG is a fictitious company. On 1 January 2026 it employs 28 people: 20 at 100 percent and 8 at 50 percent, so 24 full-time equivalents. During the year four people leave (two resignations, one retirement, one mutual agreement) and four join. The average headcount is 28.

Key figureCalculationResult
Turnover rate4 ÷ 28 × 10014.3 percent
Turnover without retirement3 ÷ 28 × 10010.7 percent
Sickness and accident absence rate168 days ÷ 6’048 planned working days × 1002.8 percent
Sickness and accident per person168 ÷ 286 days
Overtime under ArGone person with 112 hoursbelow 170 hours
Time-to-hire (median)four hires: 28, 35, 41, 63 days38 days
Key figure
Turnover rate
Calculation
4 ÷ 28 × 100
Result
14.3 percent
Key figure
Turnover without retirement
Calculation
3 ÷ 28 × 100
Result
10.7 percent
Key figure
Sickness and accident absence rate
Calculation
168 days ÷ 6’048 planned working days × 100
Result
2.8 percent
Key figure
Sickness and accident per person
Calculation
168 ÷ 28
Result
6 days
Key figure
Overtime under ArG
Calculation
one person with 112 hours
Result
below 170 hours
Key figure
Time-to-hire (median)
Calculation
four hires: 28, 35, 41, 63 days
Result
38 days

The planned working days are assumed: 24 full-time equivalents with 252 working days each. Management discusses the figures in January 2027. One person’s overtime during the year-end closing stands out; a temporary helper is planned for the next season.

Checklist

  • ☐ Key figures, formulas and reference date set down in writing
  • ☐ Headcount and full-time equivalents counted on the same date
  • ☐ Leavers recorded by reason
  • ☐ Absences split by type, rate calculated on planned working days
  • ☐ Overtime under ArG checked per person against the annual cap
  • ☐ Time-to-hire as a median
  • ☐ Personnel costs only from closed payroll runs
  • ☐ Only totals and rates, small groups combined
  • ☐ Decided who may see the key figures

How KMU | base helps

In HR | base you find the key figures under Administration › Reports. The page shows “Key figures without personal data”, with a period (“From”, “To”) and a reference date; “Company” narrows the report to one company.

Headcount and movements. “Headcount per month” shows the headcount at month end with the “Full-time equivalents”. “Headcount per company” and “Headcount per department” show people, full-time equivalents and managers at the reference date. HR | base calculates the “Turnover rate” as leavers divided by the average headcount from the opening headcount and month-end headcounts, also scaled to a year and without retirements; leavers appear by reason. Average years of service and the share of managers complete the picture.

Absences and overtime. “Days of absence by type” counts approved absences in working days. The absence rate relates to planned working days from the working-time model and cantonal public holidays, with the share for sickness and accident. Under “Overtime” you find the “Extra-time balances” at the reference date, “Overtime under ArG (year)” and the number of people affected.

Applications and costs. The recruiting “Reports” show time-to-hire as a median and the sources. In payroll, the reports show monthly personnel costs from closed payroll runs, split into gross salary, employer contributions and expenses, along with the recapitulation and the payroll account.

Export and rights. “CSV” and “Excel” download the report; every export is logged. Only people with the right can see the reports, and the figures only cover the people within their scope. Results contain counts, no names and no diagnoses. Absences by type, such as sickness or accident, are only visible with the health data permission; otherwise total absences appear. For a selected company or a restricted scope with fewer than 10 people, HR | base does not show absences or overtime, to protect the people concerned. The AI assistant answers questions about headcount, joiners and leavers, turnover and absence rate within the same scope.

Explore the demo or open a trial account. The guides to managing absences and extra hours and overtime provide further information.

Frequently asked questions

How do you calculate the turnover rate?

Divide the leavers in the period by the average headcount and multiply by 100. Calculate the average headcount from the opening headcount and the headcount at the end of each month.

How much overtime is allowed per year?

No more than 170 hours per calendar year with a maximum weekly working time of 45 hours and 140 hours with 50 hours, and no more than two hours a day (Art. 12 para. 2 ArG).

May sickness absences appear in key figures?

Yes, as totals and rates without names or diagnoses. Health data is sensitive: limit who can see the key figures and combine small groups.

Sources

  • Code of Obligations (CO, SR 220), Art. 321c and 328b, as at 1 October 2026: fedlex.admin.ch (German original), accessed on 16.11.2026.
  • Employment Act (ArG, SR 822.11), Art. 9 para. 1, Art. 12 para. 2 and Art. 13 para. 1, as at 1 September 2023: fedlex.admin.ch (German original), accessed on 16.11.2026.
  • Ordinance 1 to the Employment Act (ArGV 1, SR 822.111), Art. 73, as at 1 September 2024: fedlex.admin.ch (German original), accessed on 16.11.2026.
  • Federal Act on Data Protection (DSG, SR 235.1), Art. 5, 6 and 8, as at 7 July 2025: fedlex.admin.ch (German original), accessed on 16.11.2026.
  • FDPIC, data processing by employers: edoeb.admin.ch (German original), accessed on 16.11.2026.

This guide does not replace legal or tax advice. Information current as of 16 November 2026.

Back to top

Collaboration ×

The next step starts with a conversation.

What does your business need?